No Water in My House? Here’s What to Do
Waking up to no water in your house can be alarming. Whether you rely on a well pump or city water, the sudden loss of water disrupts your daily routine and may signal a serious plumbing issue. At Carolina Plumbing and Water Systems, we specialize in diagnosing and resolving “no water” emergencies quickly and professionally. If you’re searching for well pump repair near me or no water in house, you’re in the right place.
Why Is There No Water in My House?
1. Well Pump Failure
If your home uses a private well, the pump is responsible for drawing water into your plumbing system. A failed pump—due to electrical issues, motor burnout, or a dry well—can result in zero water flow. This is one of the most frequent causes of no water in rural and semi-rural homes.
2. Pressure Tank Problems
Your pressure tank regulates water flow and pressure. If the tank is waterlogged or the pressure switch fails, your system may stop delivering water. You might hear clicking sounds or notice the pressure gauge reading zero.
3. Frozen or Burst Pipes
During cold weather, pipes can freeze and block water flow. If they burst, you may lose water entirely or experience flooding. This is especially common in uninsulated crawl spaces or exterior walls.
4. Municipal Water Supply Issues
If you’re on city water, the problem may be external. Water main breaks, scheduled maintenance, or emergency shutoffs can interrupt service. Check with your neighbors—if they’re also without water, it’s likely a municipal issue.
5. Electrical or Power Supply Interruptions
Well pumps and pressure systems rely on electricity. A tripped breaker, blown fuse, or disconnected wire can shut down your water system. Always check your electrical panel before calling a plumber.
I Have No Water! What You Can Check Before Calling?
Before you panic or schedule a service call, here are a few quick checks you can do:
Main Water Valve: Make sure it’s fully open. Sometimes valves are accidentally closed during repairs or cleaning.
Breaker Panel: Look for tripped breakers or blown fuses related to your pump or pressure system.
Pressure Gauge: If you have a well system, check the gauge. A reading of zero may indicate a pump or tank issue.
Neighbor Status: If you’re on city water, ask your neighbors if they’re experiencing the same issue.
Leaks or Flooding: Inspect your basement, crawl space, or yard for signs of a burst pipe.
If none of these checks resolve the issue, it’s time to call Carolina Plumbing.
Call Carolina Plumbing for Fast Help When There is No Water In the House
We specialize in well pump repair, pressure tank service, and Emergency Plumbing across the Triangle. Whether it’s a failed pump, frozen pipe, or electrical issue, our licensed technicians are ready to restore your water supply—fast.
Call 919-563-3709 for same-day service in Durham, Mebane, Burlington, Hillsborough, and surrounding areas.
Why Homeowners Trust Carolina Plumbing
Choosing the right plumbing company during a water emergency is critical. Here’s why Carolina Plumbing and Water Systems is the trusted choice for families and businesses across central North Carolina:
Locally Owned & Operated: We live and work in the communities we serve.
20+ Years of Experience: Our team has seen—and solved—every type of water issue.
Licensed & Insured: Peace of mind with every service call.
Transparent Pricing: No hidden fees, no pressure—just honest service.
Emergency Availability: When water won’t wait, neither do we.
Areas We Serve
We proudly serve homes and businesses in:
Durham
Mebane
Burlington
Hillsborough
Graham
Roxboro
Pittsboro
Zip codes including 27203, 27215, 27705, and surrounding areas
If you’re searching for no water repair near me, well pump service near me, or emergency plumber in Durham, Carolina Plumbing is ready to help.
Related Services
In addition to emergency water restoration, we offer:
Pressure Tank Replacement
Water Filtration & Softening Systems
Leak Detection & Pipe Repair
General Plumbing Services
What to Expect When You Call
When you call Carolina Plumbing at 919-563-3709, here’s what happens:
Immediate Response: We’ll ask a few questions to understand your situation.
On-Site Diagnosis: A licensed technician will inspect your system and identify the cause.
Clear Estimate: We’ll explain your options and provide upfront pricing.
Fast Repairs: Most issues are resolved the same day.
Follow-Up Support: We’ll make sure your system is running smoothly and answer any questions.
Questions About Our Affordable Well Pump Repair Service?
At Carolina Plumbing, your satisfaction is our priority. If our FAQ section doesn’t cover your specific question, we’re just a call or message away. Our team is committed to providing clear, timely, and thorough support — so don’t hesitate to reach out. We’re always happy to help you find the answers you need.
Replacing a well pump fully usually costs between $1000 and $3000. Although, keep in mind that location and a few other factors may impact this. However, this range is usually what it comes down to.
No Water in My House? Call 919-563-3709 for fast, local service.
A well pump repair near me usually costs way less than replacing one fully, between $200 and $500 on average. But, more critical damages could raise the price of fixing it.
The most common sign your well pump is broken is low water pressure or no water at all. Strange noises and air sputtering from the faucet are also reliable signs.
Need help with No Water in My House? Dial 919-563-3709 today.
10 to 25 years is the average life expectancy of a well water pump. However, the older it gets the more costly it is likely to get to maintain it, mainly because of repairs and maintenance costs. But if taken care of properly, it can work perfectly well beyond 25 years as well.
Trusted well pump repair near me — call 919-563-3709 now
If you don’t know what you’re doing, replacing a well pump yourself will end up costing more than hiring an expert. There are plenty of ways to go wrong and damage the pump easily. Without the proper skillset, this isn’t safe for you as well.
Find expert well pump repair near me — call 919-563-3709.
Yes, a well pump can last 30 years, maybe more, if you go over proper maintenance and repairs regularly. A bit of luck can also help out here as well.
Affordable well pump repair near me — call 919-563-3709 for help.
Replacing a water pump shouldn’t take more than 6 hours if a skilled and experienced professional is doing the job. But, factors such as location, luck, and similar can surely impact this timeframe. In any case, the usual amount is 2 to 6 hours.
The three most common and reliable ways to tell a water pump is bad are leaks, reduced water pressure, and unusual noises coming from the pump.
There are plenty of reasons for a well pump to stop working. The most common reasons are electrical issues, mechanical issues, clogs, or issues with the pressure tank.
Looking for well pump repair near me? Call 919-563-3709 for expert help.
The biggest cause for a well pump to burn out is an inadequate water level. If there’s not enough water, the well pipe starts sucking in air, in turn heating up the pump beyond safe levels. As a result, the pump burns out if nothing is done on time.
Get fast help with No Water in My House — call 919-563-3709 today.
First, cut the power, drain the tank, and then do a visual inspection for leaks or damage. Then, turn on a connected faucet and listen for any weird noises. Finally, check if the water coming from the pump is clear and whether or not it is emitting any odors.
Help for No Water in My House is just a call away — 919-563-3709.
You can notice whether a well pump is burned or not by seeing signs such as scalding shower water, very high electric bills, strange noises from the pressure tank, fluctuating water pressure, and similar.
Your plumber to help with No Water in My House — reach us at 919-563-3709.
You should try to service your well pump at least once a year. These annual checks will ensure a long lifespan for the pump. Ideally, doing water bacteria checks, taste, odor, and appearance checks during each annual service.
Don’t wait for help with No Water in My House — call 919-563-3709 now.
Typically, it’s safe to let a well pump operate continuously without having to ever switch it off. However, if you’re leaving home for a couple of days, you’re highly advised to turn it off since electrical problems or leaks may occur while you’re gone. By the time you come back, it may be too late to do something about it.
Costs for replacing a well pump near me and its pressure tank can go as high as $3500. Depending on the pump and pressure tank you buy, this can also cost as low as around $1000.
Not immediately, but eventually yes. Once the remaining water in the tank is depleted, you will run out of water in case you lose power to your well pump.
This depends mostly on the terms that your home warranty policy has. Some policies cover a well pump while others do not.
Your well pump can trick itself into not shutting off whenever you have leaks that are preventing it from reaching its maximum allowed pressure. If a leak prevents this pressure from ever being reached, the pump will therefore never shut down in an attempt to reach this pressure.
This is hard to determine. However, one way to predict how often and when it can fail is depending on its installation, maintenance, and the frequency of the pump’s duty cycle.